Invitroal Biotechnology

InviPure LabUni Ultrapure Water System

InviPure LabUni Ultrapure Water System is designed to meet universal type 1 ultrapure water needs for various types of laboratories, our InviPure LabUni UVF system purifies water through distillation, ultrafiltration, reverse osmosis, deionization, and application of UV radiation to provide an array of required purity levels designed to meet general as well as more demanding analytical and flow-rate needs.

Applications include, but are not limited to:

  • GC, HPLC, IC, ICP, PCR, and Amino Acid Analysis
  • Configuration and dilution of analytical reagents and drugs
InviPure laboratory water systems

Features

  • Generate both RO water & ultra-pure water
  • Intelligent Control
    • automatic system shut-down when feed water supply is off
    • automatic output shot-off on system show-down
    • automatic storage tank refill and stop-on-full
  • Monitoring & Alerting
    • on no water
    • on storage tank full
    • on ultra-pure water parameters off limit of setting
  • Built-in Storage Tank
    • with 12 Liters ultr-apure water storage capacity
    • with pressurization to ensure quick and steady outflow
    • with 2 draw-off valves to avoid air-contact pollution
  • Standard Piping With Quick Connections
    • overall pull-and-plug pipe connections
    • allows connecting to external storage tanks of different sizes
  • High Yield
    • high purification capacity compared to similar brands
    • extended consumable service life
    • low operating cost
  • Easy Cartridge Replacement
    • quick detachable pre-filtration and purification column
    • full GLP compliant
  • Improved Column Placement
    • highest level of integration
    • most refined design ever exists
    • automatic system shut-down when feed water supply is off
  • Extended RO Membrane life-span
    • programmed RO membrane flush procedure
    • manual and/or automatic initiate
  • Guaranteed Water Quality
    • with built-in circulation pump so that ultrapure water outflow is always freshly purified
  • Water Quality Monitoring
    • with in-line resistivity and conductivity monitoring
    • with real-time value display for both RO and Ultrapure water
  • With NSF rectified piping and pull-and-plug connection, allows easy and quick column replacement
  • Dual wavelength(185 nm & 254 nm) UV Photo-oxidation
    • high-performance UV reliably reduces the content of microorganisms and their metabolites
    • UV oxidation also reduces organic compounds in the water to ultra-low level
  • With MWCO5000D Ultra Filtration Unit
    • Effectively eliminate Endotoxin (pyrogen)
    • Water quality is secured and guaranteed to suit cell culture and in-vitro fertilization
  • With 0.22µm compound PES end membrane, water quality is ensured to be absolutely sterile

Parameters

ModelInviPure LabUni SUVF
DescriptionInviPure LabUni Ultrapure Water System
Model No.-15, -30, -45, -60
Overall Output15, 30, 45, 60 Liters/Hour, 25˚C
Max. Flow Rate(in RO Water Output)Up to 2.0Liters/Minute, when through inner water tank
Minimum Feed Water QualityCity Tap Water Supply(TDS<250ppm, 5 ~ 45˚C, 0.02 ~ 0.25MPa, pH3 ~ 10）
Quality: Grade 1 Ultrapure Water Output
Resistivity18.25Mohm.cm(MΩ.cm), 25˚C
Conductivity0.054µS/cm, 25˚C(<0.1 µm/cm)
Heavy Metal Ions<0.01ppb
TOC (Total Organic Carbon)< 3 ppb
Pyrogen/Endotoxins< 0.001Eu/ml
Microorganism/Bacteria< 0.1CFU/ml
RNase< 0.01 ng/ml
DNase< 4 pg/µl
Particles(>0.02 µm)< 1/ml
In-line Water Quality MonitoringLCD, Resistivity, Conductivity, TDS, and Temperature Monitoring
Others
Power100 ~ 240V, 50 ~ 60Hz, 0.12kW
Size & Weight45×45×50 cm, L × W × H, 45Kg
InviPure LabUni Ultrapure Water System
Download A Full Specification and Subscribe With Us
InviPure LabPrim Ultrapure Water System
InviPure UPBase Ultrapure Water System
InviPure LabGen Type 1 Water System

Contact Us

to get a quote or request detailed prodcut information

send message
Thank you! Your message has been sent.
Unable to send your message. Please fix errors then try again.