Invitroal Biotechnology

InviPure LabPrim Ultrapure Water System

InviPure LabPrim Ultrapure Water System is a water purification system that meets your laboratory’s elementary ultrapure water needs, our InviPure LabPrim purifies water through distillation, ultrafiltration, reverse osmosis, deionization, and application of UV radiation to provide an array of required purity levels designed to meet general as well as more demanding analytical and flow-rate needs.

Applications include, but are not limited to:

  • GC, HPLC, IC, ICP, PCR and Amino Acid Analysis
  • Configuration and dilution of analytical reagents and drugs
  • Plant or Animal cell & tissue culture in molecular biology and life science
  • Medium preparation for electrophoresis gel analysis
InviPure laboratory water systems

Features

  • Generate both RO water & Ultrapure Water
  • Intelligent Control
    • automatic system shut-down when feed water supply is off
    • automatic output shot-off on system show-down
    • automatic storage tank refill and stop-on-full
  • Monitoring & Alerting
    • on no water
    • on storage tank full
    • on ultra-pure water parameters off limit of setting
  • Built-in Storage Tank
    • with 12Liters ultrapure water storage capacity
    • with pressurization to ensure quick and steady outflow
    • with 2 draw-off valves to avoid air-contact pollution
  • Standard Piping With Quick Connections
    • overall pull-and-plug pipe connections
    • allows to connect to external storage tanks of different sizes
  • High Yield
    • high purification capacity compared to similar brands
    • extended consumable service life
    • low operating cost
  • Easy Cartridge Replacement
    • quick detachable pre-filtration and purification column
    • full GLP compliant
  • Improved Column Placement
    • highest level of integration
    • most refined design ever exists
    • automatic system shut-down when feed water supply is off
  • Extended RO Membrane life-span
    • programmed RO membrane flush procedure
    • manual and/or automatic initiate
  • Guaranteed Water Quality
    • with built-in circulation pump so that ultrapure water outflow is always freshly purified
  • Water Quality Monitoring
    • with in-line resistivity and conductivity monitoring
    • with real-time value display for both RO and Ultrapure water
  • With NSF rectified piping and pull-and-plug connection, allows easy and quick column replacement
  • With MWCO5000D Ultra Filtration Unit
    • Effectively eliminate Endotoxin (pyrogen)
    • Water quality is secured and guaranteed to suit cell culture and in-vitro fertilization
  • With 0.22µm compound PES end membrane, water quality is ensured to be absolutely sterile

Parameters

ModelInviPure LabPrim UF
DescriptionInviPure LabPrim Ultrapure Water System
Model No.-15, -30, -45, -60
Overall Output15, 30, 45, 60Liters/Hour, 25˚C
Max. Flow Rate(in RO Water Output)Up to 2.0Liters/Minute, when through inner water tank
Minimum Feed Water QualityCity Tap Water Supply(TDS<250ppm, 5 ~ 45˚C, 0.02 ~ 0.25MPa, pH3 ~ 10）
Quality: Grade 1 Ultrapure Water Output
Resistivity18.25Mohm.cm(MΩ.cm), 25˚C
Conductivity0.054µS/cm, 25˚C(<0.1µm/cm)
Heavy Metal Ions<0.01ppb
TOC (Total Organic Carbon)< 10ppb
Pyrogen/Endotoxins< 0.001Eu/ml
Microorganism/Bacteria< 0.1CFU/ml
RNase< 0.01 ng/ml
DNase< 4pg/µl
Particles(>0.02µm)< 1/ml
In-line Water Quality MonitoringLCD, Resistivity, Conductivity, TDS, and Temperature Monitoring
Others
Power100 ~ 240V, 50 ~ 60Hz, 0.12kW
Size & Weight45x45x50cm, L x W x H, 45Kg
InviPure LabPrim Ultrapure Water System

Download A Full Specification and Subscribe With Us

InviPure LabUni Ultrapure Water System
InviPure UPBase Ultrapure Water System
InviPure LabGen Type 1 Water System

Contact Us

to get a quote or request detailed prodcut information

send message
Thank you! Your message has been sent.
Unable to send your message. Please fix errors then try again.